World Edit not working..?

[crybabyduke]

IGN: x_DukeFridayz_x
When: 5/15/2k16
Explain: I went to creative, a friend wanted me to do World Edit, so I did //wand and all that other stuff, when I typed //set (the blocks I wanted to use with W/E) it said 'Make region section first.'. When I used W/E before this happened, it didn't say that.
Location: Creative

 

[MC_ProYT]

Were you trusted?
Are you mockingjay?
Did you actually select a region?
Were the blocks you wanted real blocks? (For example, real blocks: grass,dirt,sand,iron_block.. not real blocks: qortz,potato,junior_mints,andrew)
Have you been able to use world edit before?
Is this your first time with world edit?

Explain please.

 

[crybabyduke]

Yes, I was trusted
Yes I'm MJ, I had it since last Sunday
I believe so, I did //wand and right clicked 1 side and left clicked other side
Yes, the blocks were real, I did //set stained_clay:red,stained_clay: pink
Yes, yesterday, but not today
No actually, I used W/E about near 15 times. Counting myself and people.


When I typed stained_clay: pink, I can't put : and pink by each other, it would make the face, but I put : and pink by each other in creative when I typed the command.

 

[MC_ProYT]

Yes, I was trusted
Yes I'm MJ, I had it since last Sunday
I believe so, I did //wand and right clicked 1 side and left clicked other side
Yes, the blocks were real, I did //set stained_clay:red,stained_clay: pink
Yes, yesterday, but not today
No actually, I used W/E about near 15 times. Counting myself and people.


When I typed stained_clay: pink, I can't put : and pink by each other, it would make the face, but I put : and pink by each other in creative when I typed the command.

ok, i think i found the problem. //set stained_clay:red is not a thing id think. i actually do //set stained_clay:14

try this out and see if it worked

 

[crybabyduke]

ok, i think i found the problem. //set stained_clay:red is not a thing id think. i actually do //set stained_clay:14

try this out and see if it worked

I did //set stained_clay: pink,stained_clay:14, and again, it said 'Make a region section first.'

 

[MC_ProYT]

I did //set stained_clay: pink,stained_clay:14, and again, it said 'Make a region section first.'

lemme try 1 sec

EDIT: I just tried this out many times.. It is fine for me. I went on my plot and did //set stained_clay:red on my plot and it worked. i asked my sister to do it on my plot and it worked. i dont know what is wrong! i honestly dont know what to do. try not using the color pink. I also tried using pink and it worked. i rlly dk. sorry!

 

[Trenly]

Did you accidentally left click or right click twice without realizing it?

Worldedit has been working flawlessly for me

 

[Zainos]

Invalid bug, moving this thread to Questions for further community assist.
Furthermore, make sure all these things when you are using World Edit:
1- You can ONLY use World Edit in the Admin's World and/or in plots/vip plots you have been TRUSTED (/p add won't work, it MUST be /p trust)
2- Since you are now just learning to use this amazing tool, make sure you are in cuboid select mode (Do //sel cuboid to confirm), and then make sure to select a first and second position with your wand. If you have done this successfully, it will tell you how many blocks you have selected in your boundaries: "Second position set to (COORDINATES) (NUMBER OF BLOCKS)". If you are World Editing in a plot, ALWAYS make sure that your selection is confined WITHIN the plot and not outside it. Elsewhere, it won't work!
3- When you are having problems with the //Set command, try firstly writing the block ID rather than the block and durability name, since most MATERIAL NAMES differ from the names you see in the Creative Inventory so this may bring you confusion. For example, use //set 159:14 for Red Stained Clay.
4- For further help regarding World Edit, I highly recommend you to watch a video tutorial since WE is a plugin with loads of things and content which can be tricky to learn all at once. This is a good tutorial you may want to watch for more information regarding this amazing tool:

Hope this helped you!

 

[crybabyduke]

Invalid bug, moving this thread to Questions for further community assist.
Furthermore, make sure all these things when you are using World Edit:
1- You can ONLY use World Edit in the Admin's World and/or in plots/vip plots you have been TRUSTED (/p add won't work, it MUST be /p trust)
2- Since you are now just learning to use this amazing tool, make sure you are in cuboid select mode (Do //sel cuboid to confirm), and then make sure to select a first and second position with your wand. If you have done this successfully, it will tell you how many blocks you have selected in your boundaries: "Second position set to (COORDINATES) (NUMBER OF BLOCKS)". If you are World Editing in a plot, ALWAYS make sure that your selection is confined WITHIN the plot and not outside it. Elsewhere, it won't work!
3- When you are having problems with the //Set command, try firstly writing the block ID rather than the block and durability name, since most MATERIAL NAMES differ from the names you see in the Creative Inventory so this may bring you confusion. For example, use //set 159:14 for Red Stained Clay.
4- For further help regarding World Edit, I highly recommend you to watch a video tutorial since WE is a plugin with loads of things and content which can be tricky to learn all at once. This is a good tutorial you may want to watch for more information regarding this amazing tool:

Hope this helped you!

It did! Thanks! Your awesome!